4
Installation & Operation Manual
Copyright © Puretec Pty Ltd 2018
Installation Guide
Installation Procedure
1. Isolate water supply and relieve pressure by opening a downstream tap.
2. Cut pipe to suit length of required valve and housing installation.
3. Use approved brass, galv/poly plumbing fittings to suit existing pipework. The
female threads on the housing will receive tapered male threads. Thread into
housing head carefully as too much tape or overtightening may cause it to split.
4. If using sweated fittings, allow enough time to cool before connecting to the
housing.
5. Securely fix wall mount bracket and pipework with suitable clips. Allow 50mm
clearance underbowl for filter changes.
6. Flush debris from pipework.
7. Install filter cartridge as per cartridge replacement instructions.
Typical Installation
1
3
2
4
5
6
1
Inlet
2
Connecting Pipework
3
Isolation Valve
4
Pressure Limiting Valve
5
Backflow Prevention valve
6
Mount Bracket and Screw
Summary of Contents for EM1-60
Page 8: ......
