background image

Installation & Operation Manual

Copyright © Puretec Pty Ltd 2018

Puretec Customer Service 

Thank you for purchasing a Puretec Ecotrol water treatment system. Your system is a 
proven performer manufactured from only quality materials and components and will 
give years of ‘spring fresh’ water free of impurities if maintained properly.

The system is designed for rainwater supply but can be used in other situations. For 
other types of water supply please contact your local Puretec stockist or call our 
Puretec Customer Service Helpline.

The Puretec filter systems cartridges need replacing regularly to maintain optimum 

performance. This is a simple procedure when following instructions. For cartridge 
replacements contact your nearest Puretec stockist.

Customer Service Helpline

 

1300 140 140

 (Australia) 

0800 130 140

 (New Zealand)

What's inside

Introduction ................................................................................................................................. 2

Guidelines and Warnings ..................................................................................................... 3

Positioning your Filter ............................................................................................................ 3

Installation Procedure ........................................................................................................... 4

Typical Installation .................................................................................................................. 4

Replacement Guide ................................................................................................................. 5

Cartridge Installation / Replacement ............................................................................ 5

Replacement Parts List ......................................................................................................... 6

Warranty ....................................................................................................................................... 7

What's Inside

Summary of Contents for EM1-60









Reviews: