PUREGAS, LLC
P200W2 Series Dehydrator User’s Guide
Page 26 of 82
P012213 – Rev. F
6.5.22
Connect the air supply line
to the Dehydrator. (Use 1/4”
Reducer as required.)
NOTE:
Compressor should
run until the High Pressure
setting (Section 6.5.13 ) is
reached.
6.5.23
Press the
RESET
Button
to clear any alarms triggered
during installation.
6.5.24
Connect the Dehydrator to Alarm Monitoring (if applicable) –
6.5.24.1
Wire the Alarm Harness to monitoring device using the table below
for reference.
Wire #
Wire Color
Function
Power Fail
1 RED SHORT
on Alarm
Alarm
4 BLACK
Common
2 BLACK SHORT
on Alarm
Alarm
5 BLUE
Common
3 BLUE OPEN
on Alarm
Alarm
6 BLACK
