PureAire Monitoring Systems, Inc.
24
NOTE:
If on the second entry the password entered was not the same as the first, the display will
take you back to the “Re-enter Password Screen”. You’ll need to repeat steps 2 through 11. If
you do not enter the password correctly, the monitor remembers the last password that was
properly input.
5.4.1 Enable User Password
This menu permits the user to activate or disable the password function on the Universal
Gas Detector. Push the joystick down.
“Enable User Password”
will scroll on the
first line of the digital display
Push the joystick right to display the status. If enabled it will display
”Enabled”
Push the joystick up or down to change the status. Once enabled or disabled is selected,
Push the joystick in the center to enter the new status. If entered correctly the display
will scroll
“Enable User Password”
5.4.2 Reset User Password
This menu permits you to reset the password back to 557, as set at the factory.
Push the joystick right to display the menu,
“Reset to factory Default”.
Push the joystick in, (like a doorbell) to reset the password back to 557.
Push the joystick left 4 times to go back to the measuring mode.
…Enable User Password…
0.0 ppm
Enabled
0.0 ppm
…Enable User Password…
0.0 ppm
…Reset User Password…
0.0 ppm
…Password Reset to factory Default…
20.9%
Gas
0.0 ppm
NOTE: If you lose your password
please contact PureAire with your
serial number or DTM number
