PureAire Monitoring Systems, Inc.
24
From this main menu, pushing the joystick to the right will select the sub menu and the
digital display will scroll the following:
Push the joystick down to access the next main menu,
Set Formats.
The display will
scroll the following:
This is the menu at which to adjust the second level alarm relay state on the Air Check
O
2
Monitor.
To change this value, push the joystick right to display the relay state. The display will
Indicate
INVERT.
Pushing the joystick down will change the relay state from INVERT
to NORMAL. Press
ENTER
to accept the value.
After entering the relay state, the display will default back to the Set Formats menu.
The display will scroll the following:
From this main menu, pushing the joystick to the right will select the sub menu and the
digital display will scroll the following:
Push the joystick twice to select the fault relay to be adjusted. The display will scroll;
Format Fault Relay.
INVERT
20.9%
NORMAL
20.9%
..Set Format …
20.9%
..Format Fault Relay...
20.9%
..Format Relay 1…
20.9%
… Format Relay 2..
20.9%
..Format Relay 1…
20.9%
NOTE:
The
menus
highlighted in
light gray are
only used for
O2 monitors
with the Alarm
Relay Board
They are
displayed on
the O
2
monitor
and their
function is
disabled.
