PureAire 1500, Owner'S Manual

Page: 9 / 16

9
Assembly
Front Grille
Replace the FRONT GRILLE and the four FRONT GRILLE SCREWS using a
Phillips Head Screwdriver. Be careful to not over-tighten the screws or
damage the IONIZATION BRUSH.
PCO Cell
(a) Slide the PCO CELL back into the upper slot with the warning at the
top, facing out. (b) Plug the PCO CELL CONNECTOR back into the WHITE
CONNECTOR SLOT.
Purification Plate
(a) Slide the PURIFICATION PLATE back into the small slot with the larger silver
side facing to the left. (b) Plug the PURIFICATION PLATE CONNECTOR back
into the RED CONNECTOR SLOT.
Side Filters
Ensure that the FILTER ASSEMBLIES are snapped together correctly, then
replace the SIDE FILTERS in each of the side slots with the rounded edges
facing outwards.
Rear Cover
Place the REAR COVER bottom edge into the hinge slot then push forwards
until the tab clicks.
Power Cord
Insert the POWER ADAPTER into the rear slot and then replace the POWER
CORD in the POWER PORT.
All parts must be properly installed before operating the unit. Failure to do so
may damage the unit.