PureAire 1500, Owner'S Manual

Page: 10 / 16

10
Cleaning
For proper operation, the unit should be cleaned at least once per month.
Unit Exterior
Wipe down the exterior with a damp cloth or use compressed air or a
vacuum cleaner to remove dust. A non-abrasive cleaner may be used on
the surfaces of the exterior.
Filter Assembly
Clean water or compressed air may be passed through the entire filter
assemblies or the individual parts when disassembled. To disassemble the
FILTER ASSEMBLIES grasp the sides of the rim and carefully separate the back
piece from the housing. The three filters [mesh, foam, honeycomb] can
then be removed and cleaned separately. If using water you must allow the
filters to fully dry before reassembly. When reassembling, the HONEYCOMB
FILTER goes in first, then the FOAM FILTER, and finally the thin MESH FILTER.
Then simply reattach the rear piece to the housing.
Turn the unit OFF and remove the POWER CORD before performing any
cleaning or maintenance to prevent injury.
Review the Disassembly and Assembly Section (Pg. 8-9) before performing
and cleaning and maintenance to prevent damage to the unit.