7
Installation
(Continued)
7. (A) Install the Mounting Plate to the
Duct using the Eight (8) Self-Tapping
Screws.
(B) For Fiberglass Ductwork, attach using
the 2” Bolts with Toggle Bolt Anchors.
8. Place the unit through the hole
and rotate is so that airflow always
passes through the honeycomb. The
mounting plate and unit head are
set up to allow for any orientation.
Alternatively, the PCO Cell can be
reoriented on the back to allow the
Power Cable to always face the the
ideal direction. (Review “Changing
the Cell” on Page 9 for instructions)
9. Thread the four (4) Knurled Thumb
Nuts onto the Threaded Bolts,
making sure a seal is created along
the backside of the Ballast Housing.
10. Plug the power cable into your unit
and then into the outlet.
