Digital Inspection Scope
Page 8 of 19
601575-001-A
Startup Procedure
CD-USB
CD-HDMI
1. Open the Windows PC viewer software
1. Plug the Control Module into a source of AC power
using Power Adapter.
2. Connect the Control Module to PC using USB
Cable
2. Connect Control Module to ANY HDMI Monitor
using HDMI cable
3.
Plug the
Inspection Borescope
into Control
Module
3. IF NEEDED-Select correct monitor input on
monitor
4. In the viewer software, click “Settings” and Select
“USB Video Device”
4. Power button set to ON (Green Light Present)
5. Press the Power Cycle Button
5.
Plug Inspection Borescope into the Control
Module
6. Press Power Cycle Button
Connecting or Switching a Inspection Borescope with the Control Module
1.
Unplug the
Inspection
Borescope
from the Control
Module
2.
Connect a new or different size
Digital Inspection Borescope
3.
Press Power Cycle Button