background image

MODEL#9335MSS

9

ASSEMBLY INSTRUCTIONS

STEP 8-10

Step 8: Assembling the 

Seesaw

Attach part C3 nylon washers 

into the holes of the top of B19 

(Upper Seesaw Pole) and 

place the D12 metal washer 

onto one side. Slide the B19 

upper pole into the bracket and 

attach with the F2 bolt and 

washer and G2 parts as shown. 

Tighten the G2 nut until the 

inner spacing is about 1.25 

inches apart. Repeat for other 

pole.

Step 9:

Insert B20 (Lower Seesaw 

Pole) into previously secured 

B19 upper pole. Align the holes 

and secure using N4, D11, L1 

and G13 nuts and bolts as 

shown in diagram. Secure and 

tighten with allen key. Repeat 

this for the other lower pole.

Step 10: 

Locate part B22 (Seat Beam) 

and E5, G2 and C3 Parts and 

attach to into the holes of the 

B22 Seat Beam. Start by 

inserting E5 Bolt with C3 nylon 

washer then add another C3 

nylon washer before adding the 

second B22 Beam. Secure the 

other B22 beam with parts G2 

washer and nut and tighten. 

Repeat this step on the other 

pole. Tighten screws securely 

with allen key and wrench. 

*Be careful not to overtighten

YD11 

x4

YG2

 

 

x4

YF2 

   

x2

YD12 

x2

YC3

 

x8

YG13 

x4

YL1

 

x4

YB19    

x2

 YB20   

x2

YB22   

x2

 YN4     

x4

 YE5   

x2

Summary of Contents for 9335MSS














Reviews: