ASSEMBLY INSTRUCTIONS
STEP 1-4
Step 1:
Assemble the frame by
connecting the 2 Top Beams,
part YB2 (Top Beam Female)
and YB1 (Top Beam Male)
together. Make sure to check
the holes are facing the right
direction and that the open
ends of the swing bracket on
beam YB2 is facing downward.
Step 2:
Secure using the YN2, YL1,
D11 and YG13 nuts and bolts
and tighten with provided allen
key as shown in diagram.
Step 3:
Connect the YD1 (Bracket) to
the end of beam YB2. Secure
using YN1, YL1, YD11 and
YG13 nut and bolt parts in
diagram shown. Then repeat
on other side of beam and
tighten nuts and bolts.
Step 4:
Slide part YBB4 (Upper Leg
Pole) into YD1 Bracket.
Secure using YN2, YL1, YD11
and YG13 nuts and bolts and
tighten with allen key as
shown in diagram. Repeat this
for other three upper leg poles.
Turn the frame over and stand
upright once all 4 upper leg
poles are attached.
Should look like diagram to the
left once complete.
YBB4
x4
YD1 1
x14
YL1
x14
YD1
x2
YB1
x1
YB2
x1
YN1
x4
YN2
x10
YG13
x14
7
Model# 9335MSS
