MODEL#9335MSS
11
ASSEMBLY INSTRUCTIONS
STEP 13-15
Step 13:
We recommend setting this
playground set in concrete
for safety and security
purposes. Locate and mark
the position for the legs.
Check the dimensions
shown on diagram on page
9. Dig square holes of
14x14x14 inches deep and
wide and fill with quick set
concrete. (Not Included)
The top of the concrete
should not exceed ground
level.
Step 14:
While concrete is wet.
Insert the Hook end of the
supplied (D2) Leg Bracket
into the concrete. Make
sure it is positioned
properly with just the hole
about 2 inches above the
surface to bolt to playset
before drying.
Step 15:
Allow concrete to dry for 24
hours, then attach each D2
Leg Bracket to the leg
poles with E12, D10, L2,
D2 and G13 bolts and nuts
like diagram shown.
*
Note
: Ensure the concrete
is completely dry before
using the swing set. Cover
the concrete with soil. We
strongly advise checking
the anchoring periodically.
YL2
x4
YD10
x4
YE12
x4
YD2
x4
YG13
x4
