STEP 4 – FRAME PAD ASSEMBLY
Lay the Frame Pad over the trampoline so that the springs and the steel frame are covered. Ensure that the
Frame Pad covers all metal parts. Make sure that the stitched flap of the frame pad is folded under the top rail.
Attach elastic bands to the tramp mat as shown in figure C, but do NOT pull them too tight or they will break off
after a period of use. The bands require a certain amount of slack, as they are attached to the jumping surface
which will have significant vertical movement during use. Failure to leave slack in the bands will result in the
bands tearing loose from the pad, and/or the pad shifting off of the top rail upon use. Once bands are secured,
pull drawstring so the stitched flap fits under the top rail.
STEP 5 – ENCLOSURE POLE ASSEMBLY
Connect 4x Enclosure Pole Bottoms (4) and 4x Enclosure Pole Tops (5) together as shown in Figure 1. Slide
the pole covers onto the completed poles as shown in Figures 2 and 3.
Figure 1
Figure 2
Figure 3
Using the enclosed Hardware, connect the Enclosure Poles to the Trampoline Frame as shown in the
diagrams below. Make sure that the square base of the Enclosure Base Bolts are inserted into the Enclosure
Pole Bottom correctly, and that it is on the “dimpled” side of the pole bottom. Be careful of pinch points when
inserting the plastic Spacers. Each pole requires 2x Enclosure Base Bolts with their corresponding hardware.
