EN
57
•
If a cable with a cut or damaged sheath is immersed in water, water may enter the pump and cause the
motor to short circuit. This will damage the pump, cause electric shock or burn.
•
To prevent the cable from being cut or twisted, which would damage the pump and could be the cause
electric shock or fire, ensure that the cable is protected against external impacts.
•
In case cable must be immersed in water, check the complete tightening of the connecting part to avoid
electric shock or burning.
•
Never immerse the cable ends in water.
•
If it is necessary to extend the cable, use an extension cable with the same or larger core size as the
cable supplied with the pump
•
To prevent water from getting inside the cable, check the connection of the attachment part of the
cable.
•
To avoid damage, route the cable so that it is not bent, broken, or pinched against the construction
.
Conection
Cable
Extension cable
