PulseTec EXCEL 200 QUAD Instruction Manual Download Page 43

43

If material defects or manufacturing faults should arise in a product distributed or manufactured 

by PULSETEC a division of TCRP INTERNATIONAL LLC Ltd, and purchased by a consumer, we 

PULSETEC acknowledge the obligation to correct those faults or defects within the limitations described 

below. This manufacturers warranty is in addition to, and does not affect, the legal or contractual rights 

of the consumer which arise from the purchase of such products. PULSETEC guarantees the consumer 

that its products are free from material, manufacturing, and construction faults, as determined by the 

general state of knowledge and technology valid at the time of manufacturing. The fault responsible for 

causing the damage must be proven to have been present in the product at this time. Claims for com-

pensation arising from consequential damage or product liability will not be considered valid unless they 

fall under peremptory provisions of the law. If material defects or manufacturing faults should arise in a 

product distributed or manufactured by PULSETEC in the European community (EC) and purchased by 

a consumer, then PULSETEC undertakes to correct those defects within the limitations described below.

This manufacturer’s declaration does not affect the consumer’s legal or contractual rights regarding de-

fects arising from the purchase contract between the consumer and the dealer or reseller.

Extend of the Warranty

If a claim is made under warranty, we take at our discretion to repair or replace the defective goods. 

We will not consider supplementary claims, especially for reimbursement of costs relating to the defect 

(e;g. installation / removal costs) and compensation for consequent damages unless they are allowed by 

statute. This does not affect claims on legal regulations, especially according to the product liability law.

Provisions of the Warranty

The purchaser is required to make the warranty claim in writing, and must enclose original proof of pur-

chase (e.g. invoice, receipt, delivery note) and the appropriate warranty card. He must send the defective 

goods to our local representatives or directly to

 

PULSETEC a division of TCRP INTERNATIONAL LLC Ltd  

21B Moskovska Street. Floor 3 - 1000 Sofia - Bulgaria at his own risk and cost. The purchaser should 

state the material defect or manufacturing fault, or symptoms of the fault, as accurate as possible, so that 

we can check if our warranty obligation is applicable. The goods are transported from the consumer to 

us, and from us to the consumer, entirely at the risk and cost of the consumer.

Invalidation of the Warranty

The consumer cannot make a claim under warranty when the fault is affecting the use of the product 

arising from natural wear, competition use, or improper use (including installation) or external forces. 

The consumer’s adherence to the building and operating instructions relevant to the model, including the 

installation, operation, use of, and maintenance of, model-related components cannot be supervised by 

PULSETEC. Therefore PULSETEC is in no way liable for loss, damage, or costs resulting from improper 

use, or behaviour in any way connected to the above described provisions. Unless otherwise required 

by law, PULSETEC is in no way whatever liable to provide compensation for damages arising from the 

improper use of the model (including personal injury, death, damage to buildings, loss of turnover, loss 

of business, or interruption of business, or any other direct, or indirectly caused, consequential damage).

Duration of Validity

The claim period is 24 months from the date of purchase of the product by the consumer from a dealer in 

the European Community (EC) counted from the date of purchase. The claim period is 12 months from 

the date of purchase of the product by the consumer from a dealer outside the European Community (EC) 

counted from the date of purchase. If a defect arises after the end of the claim period, or if evidence or 

Warranty Conditions & Liability Disclaimer

Summary of Contents for EXCEL 200 QUAD













































Reviews: