39
EXCEL 200 QUAD Firmware Update V1.05
Charger is detected
file length: 186368
Update
EXCEL 200 QUAD Firmware Update V1.05
Charger is detected
Progressing: 53
file length: 186368
Update
The free “Charge Master PRO” software gives you unparalleled ability to operate the
charger through the computer. You can monitor pack voltage, cell voltage and other data
during the charging, view charge data in real-time graphs. And you can initiate, control
charging from “Charge Master PRO”.
In order to connect the charger to the computer and use the “Charge Master PRO”, you
are required to use a USB cable which is not included in this package. The cable must be
terminated on one end with “A” plug and the opposite end is terminated with “micro-B” plug
which can connect to charger directly.
You can control, monitor, operate two channels with one computer.
The “Charge Master PRO” can be download from
http://data.tcrp-intl.com/Pulsetec_Charge_Master_Pro_Software.exe
FIRMWARE UPDATE
Follow the instructions below to update the firmware for the EXCEL 200 QUAD.
1. Download the firmware (File Name: EXCEL 200_Update_VX.XX.exe) from
www.pulsetec.eu.
2. Power the charger and Press START button once.
3. Connect the charger to a computer with a USB cable.
4. Launch EXCEL 200_Update_VX.XX
5. Click on the “Update”, the firmware update will start automatically. Do not disconnect the
charger from the computer during firmware update.
6. The firmware update will take around 2 minutes.
The Charge Control Software “Charge Master PRO”
