18
R:3SER S:3SER
CONFIRM(ENTER)
Lp4s 1.5A 12.14V
BAL 000:50 00022
START/ENTER
BATTERY CHECK
WAIT...
R:3SER S:3SER
CANCEL(STOP)
[ END: FINISHED ]
16.8V 2600mAh
100
[ Time: 00: 45: 32 ]
16.8V 2600mAh
100
The charger is detecting the battery cell.
R shows the number of cells detected by the charger and S is the
number of cells set by you on the previous screen. If the two numbers
are not identical, press STOP to go back to the previous screen to
recheck the number of cells of the battery pack that you set before
going ahead.
R shows the number of cells detected by the charger and S is the
number of cells set by you on the previous screen. If the two numbers
are identical, press START/ENTER to start the charging process.
Charging Status Monitor
During charge process, real-time status will be shown as seen on the
left.
Program Complete
Once the battery is fully charged, the screen will read
“END: FINISHED” and the charger will emit a ringing sound. The
charger also displays battery voltage, charged capacity and elapsed
time.
PROGRAM STOP
During the charging process, press STOP to stop the charging process.
Lithium Battery Program (LiPo/LiFe/LiIon/LiHV)
