Pulse-Eight neo:4Pro, User Manual

Page: 8 / 35

8
1. IR Transmitter - An IR flasher (emitter) is required when wanting to output (blast) an IR command to an
attached device Please use compliant Pulse-Eight IR emitters (5V) as failure to do so might result in damage
to the product
HDBaseT Input - Connect the appropriate category cable (Cat6 or higher recommended) to the each input of
the receiver; these cables should then be connected to one of the HDBaseT outputs on the matrix The LEDs
will illuminate to indicate a link (amber LED) and power (green LED) is being received
IR Receiver (RX ) - The IR Receiver port (black) can used to distribute IR signals back to the matrix when
connecting an IR Receiver
IR Flasher (TX) - The IR Flasher port (grey) is used to control the connected HDMI Sink device (TV) using the
IR transmitter
HDMI Output - Connect the appropriate high speed HDMI cable to this port and connect to the sink device
A
B
C
D
INFRARED BLASTER CABLE PACK
2. IR Receiver - An IR receiver is required when wanting to accept incoming IR signals - for example, from a
remote control - to distribute and control other attached devices remotely Please use compliant Pulse-Eight
IR receivers (5V) as failure to do so might result in damage to the product
NEO:LITE RECEIVER