Pulsar IMP Lite 10, Instruction Manual

Page: 17 / 38

Page12
Button Functions
There are 4 push buttons located under the display. Their name and functions
are as follows:
Button Run Mode Program Mode
ESC
Displays details of unit
Serial No. and Software
Version Used to Navigate out of the
Menu System and return to
Run Mode. Also used to
Cancel a Parameter Value
entered in error.
UP Displays Current
Temperature Used for Navigating around
Menu System and Increasing
Menu Option Values.
DOWN Displays Current Echo
Strength (dB’s) Used for Navigating around
Menu System and Decreasing
Menu Option Values.
ENTER
Displays current mA output Used to confirm an action such
as entering a Menu Option or
Enter a Parameter Value.
How to Access Program Mode
To access the Program mode, press the “ ESC
” and “
Enter
” button
simultaneously, where upon the display will show PASS on the LCD display
briefly, to prompt you to enter the password, the display will now show 0000 ,
and the left-hand digit will flash.
By using the UP and DOWN keys to increment or decrement the digit, and the
ENTER key to shift the flashing digit to the next position. Assuming the
passcode is the default 1997, you should then enter this.
The ESC key can be used to go back to the previous digit. Finally, when you
have selected all digits pressing the ENTER key again will input the selected
pass code to the
IMP Lite
; if successful the display will show APP
(Application). If however you input the wrong pass code the
IMP Lite
LCD
display will show Fail for 2 seconds and will revert back to run mode.