dBi-M
INSTRUCTION MANUAL
56
P605 Volume Units
This parameter determines the units that you wish to display, for volume
conversion. It is used in conjunction with
P607
(
maximum volume
), and the
units are shown on the display (subject to P810). The choices are:
OPTION
DESCRIPTION
0 = No units
Volume will be totalised with
no units
1 = Tons
Volume will be totalised in
Tons
2 = Tonnes
Volume will be totalised in
Tonnes
3 = Cubic metres (Default)
Volume will be totalised in
Cubic metres
4 = Litres
Volume will be totalised in
Litres
5 = UK Gallons
Volume will be totalised in
UK Gallons
6 = US Gallons
Volume will be totalised in
US Gallons
7 = Cubic Feet
Volume will be totalised in
Cubic Feet
8 = Barrels
Volume will be totalised in
Barrels
P606 Correction Factor
This parameter is used to enter a correction factor, when required, such as
the specific gravity of the material so that the volume calculated is relative to
the actual amount of material that can be contained between
empty level
(
P105)
and 100% of
span
(
P106). Default = 1
P607 Max Volume
This parameter displays the actual maximum volume that has been
calculated by the dBi-M PC software, i.e.,
P604 Calculated Volume x P606
Correction Factor
, and is a Read Only parameter. The volume will be shown
in
P605 Volume Units
and is the total volume available between
empty
level
(
P105)
and 100% of
span
(
P106
).
Summary of Contents for dBi-M
Page 1: ...dBi M Instruction Manual...
Page 2: ...2...
Page 10: ...dBi M INSTRUCTION MANUAL 10 EU UK Certificate of Conformity...
