Pulsar dBi-M, Instruction Manual

Page: 28 / 71

dBi-M INSTRUCTION MANUAL
28
NAME
ICON
DESCRIPTION
Upload
This enables you to download all parameters that
are currently in the dBi-M that is connected to the
PC software. You will be prompted to save the
parameters when the download is complete.
Send
Parameters to
Unit
This allows you to send all parameters at once in
the PC software to the dBi-M that is connected.
Single
Programming
This enables you to program one parameter at a
time. Press the single programming icon and,
when the Interactive Programming display
window appears, press the connector icon, this
will connect PC to dBi-M. Key in the parameter
number required, and press the read key. Change
the value to the required amount and press send,
the change is then verified.
Note: Pressing the Hard Default or Factory
Default icons will restore factory parameters to
your unit and information will be lost if not
previously saved.
Status Display
Selecting this icon enables a small list of
information about the performance of the unit.
This includes: Level, Distance, Volume,
Temperature, Noise, Strength, and Status.
System
Information
This enables you to view the current firmware
version, Hardware version and serial number of
the dBi-M connected to the PC software.
Exit
Selecting this will exit your current session from
the PC software. Please ensure any unsaved
parameters are uploaded to the dBi-M prior to
selecting this option.
Factory Defaults
If an icon is greyed out then that function is not accessible, for example, if
you are viewing echoes then you cannot access files, to access files you
must click ‘Off’ in the regular echo box then a file can be accessed.