Pulsar AWZ516, Manual

Page: 1 / 12

1
AWZ516
v.2.1
PC1
Time relay module.
Edition: 5 from 01.03.2018 EN*
Supersedes the
edition:
4 from 15.01.2015
Features:

10
÷ 16V DC power supply

18 time-logic programs

The range of measured times: up to 100 hours

High precision time measurements

High load capacity of relay contacts

LED display

Three function buttons

Activated by plus "S +" or mass "S-"

Reset input activated by mass "R-"

Optical indication of power supply and relay output status

The possibility of implementing additional time-logic programs

Warranty - 2 year from the production date
TABLE OF CONTENTS.
1.
General description. ....................................................................................................................................... 1
2. Components arrangement. ............................................................................................................................ 2
3. Programming the time module. ..................................................................................................................... 3
4. Preview - the parameters of currently set program. .................................................................................... 4
5. Previewing the status. .................................................................................................................................... 4
6. Timer programs. .............................................................................................................................................. 5
7. Programming example. ................................................................................................................................ 10
The time module is factory set to PR0 program mode with active REL relay.
1. General description.
The PC1 time module is a transceiver allowing execution of time-logic programs. The device is
characterized by versatility, high accuracy of the measured time based on the crystal oscillator and the possibility
of its precise and repeatable adjustment. The relay can be used to extend short control impulses, e.g. controlling
the operation locks, electromagnetic jumpers, bistable control, etc. The relay is used in automation and control
circuits and access control projects,
with logical dependencies on the state of: the controller, door opening sensor
(reed switch), exit button, etc.