3
3. Programming the time module.
If there is no action for more than 30 seconds when changing the parameters settings, the module
automatically exits the programming mode without saving the changes.
1) Press the and buttons simultaneously for 5 seconds to enter
the programming mode.
The
„PR” LED will blink and the number of currently saved
program will be displayed.
2) Use the or buttons to select the desired program number.
Confirm by pressing "OK
.” button.
3) Use the or but
tons to set the „T1” time (hours).
(when required).
The
„T1” and „h” LEDs are ON.
Confirm by pressing
„OK.” button.
4) Use the or
buttons to set the „T1” time (minutes).
The „T1” and „m” LEDs are ON.
Confirm by pressing „OK.” button.
5) Use the or
buttons to set the „T1” time (seconds).
The „T1” and „s” LEDs are ON.
Confirm by pressing „OK.” button.
6) Use the or
buttons to set the „T2” time (hours)
(when required).
The „T2” and „h” LEDs are ON.
Confirm by pressing „OK.” button.
7) Use the or
buttons to set the „T2” time (minutes).
The „T2” and „m” LEDs are ON.
Confirm by pressing „OK.” button.
8) Use the or
buttons to set the „T2” time (seconds).
The „T2” and „s” LEDs are ON.
Confirm by pressing „OK.” button.
9) The scrolling message
„ready” - indicating readiness for operation
of the module according to the selected mode and preset times
–
will be displayed
