8
PR12
– Delaying the impulse - the T1 to T2 time.
The „S” triggering signal (rising
edge) activates the countdown of the T1
time, followed by the activation of the
"REL" relay for the T2 time period.
Another „S” triggering signal during
the countdown of the T1 or T2 time will
not affect the operation in this cycle.
Every next cycle can begin only
after
the
completion
of
the
T2
countdown.
PR13
- Delaying the impulse - the T1 to T2 time with resetting the T1 time.
The „S” triggering signal (rising
edge) activates the countdown of the T1
time, followed by the activation of the
"REL" relay for the T2 time period.
Another „S” triggering signal during the
countdown of the T1 time (rising edge)
resets and restarts the T1 countdown
process.
Another „S” triggering signal during
the countdown of the T2 time will not
affect the countdown until activation of the „REL” relay.
Every next cycle can begin only after the completion of the T2 countdown .
PR14
- T1 time activation delay and T2 time deactivation delay.
The „S” triggering signal (rising
edge) activates the countdown of the T1
time, followed by the activation of the
"REL" relay if the
„S” signal is still on.
The relay stays activated for the entire
duration of the
„S” signal. A loss of the
„S” signal (falling edge) activates the
countdown of the T2 time, followed by
deactivation of the "REL" relay.
If the triggering signal is shorter
than the T1 time, then the REL relay is not activated.
Another „S” triggering signal during the countdown of the T2 time will not affect the operation in this
cycle.
Every next cycle can begin only after the completion of the T2 countdown .
PR15
- T1 time activation delay and T2 time deactivation delay with resetting the T2 time.
The „S” triggering signal (rising
edge) activates the countdown of the T1
time, followed by the activation of the
"REL" relay if the „S” signal is still on.
The relay stays activated for the entire
duration of the „S” signal. A loss of the
„S” signal (falling edge) activates the
countdown of the T2 time, followed by
the deactivation of the "REL" relay.
If the triggering signal is shorter
than the T1 time, then the REL relay is not activated.
