Page 6 of 52
1.6 Requesting Spare Parts
For preventative maintenance, Pulsafeeder recommends the installation of a KOPkit (
K
eep-
O
n-
P
umping), which includes the recommended spare parts needed. The part number for this kit can
be located on the pump nameplate as well as the specification data sheet provided with your
metering pump.
For other needed components, find and study the sectional drawings of the pump in use, if
necessary, contact Pulsafeeder to obtain a copy. For drawings and bill of materials for your
pump(s) please send an email to
. Using the nomenclature of the sectional
drawing, make a list of the parts needed and send to your local Pulsafeeder sales representative,
always specify the pump serial number.
To find the local Pulsafeeder representative for parts pricing and availability log onto
, select “Find a Rep or Distributor”. If additional assistance is needed, call
Pulsafeeder at 585-292-8000.
1.7 Spare Parts
Modifications are not allowed. Original Pulsafeeder spare parts and accessories are to be used to
assure conformity with safety rules. Pulsafeeder declines any responsibility in case of use of non-
original parts and which results in the warranty being voided.
1.8 Liability Exclusion
Attempts to disassemble, modify, or tamper in general by unauthorized personnel will void the
warranty and will release Pulsafeeder from any liability for damage caused to persons or property
resulting from such actions.
Pulsafeeder is considered released from any liability in the following cases:
o
Improper Installation
o
Improper use of the machine by non-professional or inadequately trained operators
o
Use not in compliance with regulations in the Country of use
o
Lack of maintenance or improperly performed
o
Use of non-original spare parts or incorrect parts for model in question
o
Total or partial failure to observe the instructions
o
Exception environmental events
1.9 Restrictions Regarding this Document
This document is the property of Pulsafeeder together with the technical information contained in it.
Modification, reproduction, or copying (in part or whole) without written permission is prohibited.
2.
Transport and Storage
2.1 Consignment receipt and unpacking
Immediately after receipt of the equipment it must be checked against the delivery/shipping
documents for its completeness and that there has been no damage in transportation.
Check any crates, boxes, or wrappings for any accessories or spare parts that may be packed
separately with the equipment or attached to side walls of the box.
Each product has a unique serial number, check that the number corresponds with that advised,
and always quote this number in correspondence as well as when ordering spare parts.
Shortages or damage should be reported immediately to the carrier and your Pulsafeeder
Representative.
