Pulsafeeder Pulsalube 8 GS Ultra, Operation & Maintenance Manual

Page: 186 / 198

CLINCHER
™
OIL FILL QUANTITIES
RETAIN FOR FUTURE USE
U11900 - 1 of 1
Type M1 M2 M3 M4 M5 M6
Quarts Liters Quarts Liters Quarts Liters Quarts Liters Quarts Liters Quarts Liters
SK 0182NB 0.42 0.40 0.58 0.55 0.58 0.55 0.42 0.40 0.42 0.40 0.42 0.40
SK 0282NB 0.74 0.70 1.16 1.10 0.85 0.80 1.16 1.10 0.95 0.90 0.95 0.90
SK 1282 1.00 0.95 1.37 1.30 0.95 0.90 1.37 1.30 1.06 1.00 1.06 1.00
SK 1382NB 1.48 1.40 2.43 2.30 2.32 2.20 2.32 2.20 2.11 2.00 2.11 2.00
SK 1382 1.53 1.45 1.69 1.60 1.22 1.15 1.80 1.70 1.16 1.10 1.16 1.10
SK 2282 1.80 1.70 2.43 2.30 1.80 1.70 2.32 2.20 2.01 1.90 2.01 1.90
SK 2382 2.43 2.30 2.85 2.70 2.22 2.10 3.38 3.20 2.11 2.00 2.11 2.00
SK 3282 2.96 2.80 4.23 4.00 3.49 3.30 4.02 3.80 3.17 3.00 3.17 3.00
SK 3382 4.02 3.80 4.54 4.30 3.17 3.00 5.81 5.50 3.17 3.00 3.17 3.00
SK 4282 4.44 4.20 5.71 5.40 4.65 4.40 5.28 5.00 4.44 4.20 4.44 4.20
SK 4382 6.45 6.10 7.29 6.90 5.18 4.90 8.88 8.40 5.28 5.00 5.28 5.00
SK 5282 7.93 7.50 9.30 8.80 7.93 7.50 9.30 8.80 7.61 7.20 7.61 7.20
SK 5382 13.2 12.5 12.7 12.0 7.08 6.70 14.8 14.0 8.77 8.30 8.77 8.30
SK 6282 18.0 17.0 16.4 15.5 13.2 12.5 18.5 17.5 11.6 11.0 14.8 14.0
SK 6382 16.9 16.0 13.7 13.0 10.6 10.0 19.0 18.0 14.8 14.0 13.2 12.5
SK 7282 26.9 25.5 22.2 21.0 21.7 20.5 28.5 27.0 16.9 16.0 22.2 21.0
SK 7382 23.2 22.0 22.2 21.0 16.9 16.0 26.4 25.0 24.3 23.0 23.2 22.0
SK 8282 39.6 37.5 34.9 33.0 32.2 30.5 46.5 44.0 32.8 31.0 32.8 31.0
SK 8382 36.5 34.5 34.3 32.5 26.4 25.0 40.2 38.0 37.0 35.0 31.7 30.0
SK 9282 79.0 75.0 74.0 70.0 59.0 56.0 85.0 † 80.0 † 69.0 65.0 62.0 59.0
SK 9382 78.0 74.0 74.0 70.0 45.4 43.0 79.0 † 75.0 † 69.0 65.0 63.0 60.0
SK 10282 95.0 90.0 95.0 90.0 42.3 40.0 95.0 † 90.0 † 63.0 60.0 87.0 82.0
SK 10382 90.0 85.0 95.0 90.0 77.0 73.0 106 † 100 † 85 80.0 85.0 80.0
SK 11282* 174 165 169 160 153 145 206 † 195 † 106 100 148 140
SK 11382* 169 160 164 155 148 140 222 † 210 † 164 155 143 135
SK 12382* 169 160 164 155 148 140 222 † 210 † 164 155 143 135
* For shipping purposes the larger Clincher ™ gear units are supplied without oil.
† Oil quantities shown are for the gearbox only. When the OT (oil tank) option is used, the oil must be filled to the level shown on the
dipstick which is located inside of the oil tank. Even when the gear unit is filled by NORD, the user MUST add more oil untill the oil is
filled to the proper level.
www.nord.com/docs 12.22.14
NORD Gear Corporation
Toll Free in the United States: 888.314.6673
NORD Gear Limited
Toll Free in Canada: 800.668.4378
M1
M2
M4
M5
M3
M6
CLINCHER
™
lubrication
Unless otherwise noted below, the following NORD Gear
reducers are shipped from the factory with a pre-determined
oil fill level in accordance to the specified reducer size and
mounting position. For additional information, please refer
to the “Oil Plug & Vent Locations” documentation for your
gear unit.
STOP
HARMFUL SITUATION
STOP
Actual oil volume can vary slightly depending upon the
gear case size, mounting and ratio. Prior to commission-
ing the reducer, check the oil-fill level using the reducer’s
oil level plug and drain or add addition oil as needed. The
minimum acceptable oil level is 0.15 in (4mm) below the
oil level hole.
For mounting orientations other than shown please consult
NORD Gear. Reducer modifications may be required.