Pulsafeeder Pulsalube 8 GS Ultra, Operation & Maintenance Manual

Page: 14 / 198

Safety Data Sheet
pulsa.com
______________________________________________________________________________________________________________________
6 | P a g e
Relative Density (at 15 °C): 0.907
Flammability (Solid, Gas): N/A
Flash Point [Method]: >282°C (540°F) [ASTM D-92]
Flammable Limits (Approximate volume % in air): LEL: 0.9 UEL: 7.0
Autoignition Temperature: N/D
Boiling Point / Range: > 316°C (600°F)
Decomposition Temperature: N/D
Vapour Density (Air = 1): > 2 at 101 kPa
Vapour Pressure: < 0.013 kPa (0.1 mm Hg) at 20 ºC
Evaporation Rate (n-butyl acetate = 1): N/D
pH: N/A
Log Pow (n-Octanol/Water Partition Coefficient): > 3.5
Solubility in Water: Negligible
Viscosity: 460 cSt (460 mm2/sec) at 40 ºC | 30.5 cSt (30.5 mm2/sec) at 100°C
Oxidizing Properties: See Hazards Identification Section.
OTHER INFORMATION
Freezing Point: N/D
Melting Point: N/A
Pour Point: -6°C (21°F)
DMSO Extract (mineral oil only), IP-346: < 3 %wt
SECTION 10 STABILITY AND REACTIVITY
STABILITY: Material is stable under normal conditions.
CONDITIONS TO AVOID:
Excessive heat. High energy sources of ignition.
INCOMPATIBLE MATERIALS:
Strong oxidisers
HAZARDOUS DECOMPOSITION PRODUCTS:
Material does not decompose at ambient temperatures.
POSSIBILITY OF HAZARDOUS REACTIONS:
Hazardous polymerization will not occur.
SECTION 11 TOXICOLOGICAL INFORMATION
INFORMATION ON TOXICOLOGICAL EFFECTS
Hazard Class Conclusion / Remarks
Inhalation
Acute Toxicity: No end point data for
material. Minimally Toxic. Based on assessment of the components.
Irritation: No end point data for material. Negligible hazard at ambient/normal handling temperatures.
Ingestion
Acute Toxicity: No end point data for
material. Minimally Toxic. Based on assessment of the components.
Skin
Acute Toxicity: No end point data for
material. Minimally Toxic. Based on assessment of the components.
Skin Corrosion/Irritation: No end point data Negligible irritation to skin at ambient temperatures. Based on