CT10.241, CT10.241-C1
CT-Series
3-P
HASE
,
24V,
10A,
240W
May 2018 / Rev. 2.0a DS-CT10.241-EN All values are typical figures specified at 3x 400Vac, 50Hz input voltage, symmetrical
phase voltages, 24V, 10A output load, 25°C ambient and after a 5 minutes run-in time unless otherwise noted.
www.pulspower.com Phone +49 89 9278 0 Germany
21/28
21.3.
YRM2.DIODE
-
R
EDUNDANCY
M
ODULES
The YRM2.DIODE is a dual redundancy module, which can be used to build 1+1 or N+1
redundant systems.
The device is equipped with two input channels each 10A nominal, which are individually
decoupled by utilizing diode technology. The output can be loaded with nominal 20A.
The device does not require an additional auxiliary voltage and is self-powered even in case
of a short circuit across the output.
The device has a monitoring circuit included and is the perfect choice when the power supply
has no DC-OK function. Two LEDs and two relay contacts signal when one of the two input
voltages is not in range due to a non-functioning or disconnected power supply.
The unit is very slender and only requires 32mm width on the DIN-rail.
See chapter 22.6 for wiring information.