background image

Always switch off the cleaner and remove the plug from the electricity power supply before cleaning 
your appliance, when not in use, or attempting any maintenance task. The cleaner must only be 
connected to an AC power supply at the voltage shown on the rating label. This cleaner should only  
be used for its intended purpose as described in this instruction manual.

 

1.

  This appliance is 

not

 intended for use by 

persons (including children) with reduced 

physical, sensory or mental capabilities, 

or lack of experience and knowledge 

unless they have been given supervision 

or instruction concerning the use of the 

appliance by a person responsible for their 

safety.

2.

  Children should be supervised to ensure that 

they 

do not

 play with the appliance.

3.

  To prevent electrical shock 

do not

 immerse 

the appliance, power cord or power plug into 

water or other liquids.

4.

  To prevent electrical shock 

do not

 use the 

vacuum cleaner outdoors.

5.

  Always check the power cord before use. 

The power cord and the plug should be in a 

good condition and must not be damaged. 

If the power cord is damaged or defective, 

it must be replaced by the manufacturer, its 

service agent, or similarly qualified persons 

in order to avoid a hazard.

6.

 

Do not

 unplug by pulling on the power cord. 

To unplug, grasp the plug not the power 

cord. Use only Australian and New Zealand 

electrical safety approved extension cords.

7.

 

Do not

 pull or carry the appliance by the 

power cable, use the power cable as a 

handle or pull the power cable around 

sharp edges or corners. Avoid running the 

appliance over the power cable.

8.

  Ensure the appliance is switched off 

before unplugging.

9.

 

Do not

 handle or operate the appliance 

with wet hands, and follow electrical safety 
precautions at all times.

10.

  Extreme caution should be exercised when 

using the appliance on stairs.

11.

 

Do not

 attempt to change the attachments 

while the appliance is plugged in to mains 
power supply. Switch off and remove 
plug from mains power supply. Use only 
manufacturer’s recommended accessories.

12.

 

Do not

 operate the vacuum cleaner too 

close to heaters, radiators and other hot 
surfaces.

13.

 

Do not

 use the appliance to pick up 

hot water/ liquids, flammable items or 
combustible liquids (i.e. petrol, hot ashes 
cigarettes, matches, explosive materials or 
anything burning) or use in areas where such 
substances and items may be present.

14.

 

Do not

 use the appliance to pick up toxic 

materials (i.e. chlorine bleach, ammonia).

15.

  Ensure the appliance is disconnected from 

the main power supply before connecting 
the hose to the unit.

16.

 

Do not

 operate or use the appliance without 

dust bag and/or filters in place while dry 
vacuum cleaning.

17.

  Before vacuuming, remove any large or 

sharp objects from the floor or cleaning 
surface in order to prevent damage to the 
filter.

SAFETY PRECAUTIONS AND WARNING:

IMPORTANT

WHEN USING YOUR VACUUM CLEANER BASIC PRECAUTIONS SHOULD ALWAYS 
BE OBSERVED, INCLUDING THE FOLLOWING;

2

Summary of Contents for 11500020













Reviews: