1.
Do not
operate the vacuum cleaner too close to heaters, radiators, and other
hot surfaces.
2.
Before inserting the plug into the wall, make sure your hand is dry.
3.
Before turning on the vacuum cleaner, remove any large or sharp objects from
the floor or cleaning surface in order to prevent damage to the filter.
4.
When you want to pull the plug from the wall,
do not
use the power cable, gently
pull the plug from the power socket.
5.
If the hose inlet or telescopic chrome tube are blocked, you should switch off the
cleaner straight away and remove from mains power. Clear the blockage before
attempting to start the vacuum cleaner again.
18.
If the hose inlet, floor tool, or the 2 piece
metal tube is blocked, switch off the cleaner
straight away and disconnect from the main
power. Clear the blockage object before
attempting to start the vacuum cleaner again.
19.
Do not
leave the appliance unattended when
it is connected to a mains power supply.
20.
Before carrying out any maintenance service
or cleaning the filters, always switch off the
vacuum cleaner and disconnect the plug
from the power supply.
21.
Keep the ends of the hose, telescopic tube
and other openings away from your face
and body.
22.
Do not
use the vacuum cleaner if it is
damaged or breaks down. Check the
electrical cable regularly for defects. If
cables, hose, electrical contacts
and/or metal tubes are damaged, have
them replaced immediately.
23.
Never
clean the vacuum cleaner or any
of the electrical parts with water or liquid
cleaners.
24.
Never
attempt to make any electrical
modifications to the vacuum cleaner.
25.
Always store the appliance indoors in a cool
and dry place.
26.
Damage caused by improper use or by
not
observing the instructions in this manual will
void the warranty.
27.
Only plug the machine into a 15amp power
socket.
BEFORE YOU BEGIN
This machine is equipped with a cord and plug. In the event that either of these parts get
damaged, it must be repaired by a qualified technician.
3
PULLMAN 80L WET & DRY
CB80
