background image

Electrical Home-Aids Pty. Ltd. 

ABN 62 007 539 577

Ground Level, Building 3, Brandon Business Park 

530 Springvale Road, Glen Waverley, Victoria 3150

Pullman is a registered trademark.

Contact Electrical Home-Aids Pty. Ltd. for your nearest authorised  

service centre on 1800 815 270 (AU) or 0800 282 288 (NZ).

[email protected]

V1 0117

Your Pullman cleaner has a 
one year parts and labour 
warranty against product 
defects and failures when the 
product is used in accordance 
with the terms and conditions 
of this warranty statement.

The cleaner must be operated in accordance with 
these instructions. This cleaner is not designed for 
the collection of vitreous building material including 
particle board, construction products and similar 
products such as wood/fibres, cement, fillers, 
fibre glass etc or excessive or frequent sand. The 
infrequent pick-up of these materials in these 
circumstances may be harmful to your cleaner 
and may void the manufacturer’s warranty.
Accessories and consumables including dust 
bags and filters, unless defective in manufacture, 
are not subject to this warranty. In order to prolong 
the life of accessories and consumables, regular 
care and maintenance is recommended.
When properly used and cared for, your cleaner 
will render excellent service; refer to the instruction 
manual for further details, as misuse or failure to 
follow the instructions makes this warranty void. 
In the event of service or advice being needed, 
please contact Electrical Home-Aids Pty Ltd, ABN 
62 007 539 577, Ground Level, Building 3 Brandon 
Business Park, 530 Springvale Rd, Glen Waverley, 
VIC 3150. Customer Care: 1800 815 270.
The decision to repair or replace the cleaner is at 
the sole discretion of Electrical Home-Aids Pty Ltd. 
If International Cleaning Solutions Pty Ltd decide 

to repair or replace the cleaner, it will do so at its 
own cost.
Electrical Home-Aids Pty Ltd is unable to accept 
responsibility under this warranty for any repair 
work not carried out by an authorised Electrical 
Home-Aids Service Agent or from the use of 

 

non-genuine parts. If any part is no longer 
available or manufactured, International Cleaning 
Solutions will replace it with a genuine functional 
replacement part. This warranty does not apply 
to the cost of replacing any parts of the product 
due to normal wear and tear, alterations, improper 
installation, physical abuse, misuse or accidental 
damage. Any transportation costs involved in the 
repair of defective parts shall be borne by the 
claimant.
If proof of purchase cannot be provided at the time 
of a warranty claim or service, any work carried 
out on the cleaner is chargeable. The repair or 
replacement of the cleaner under this warranty 
does not extend the original period of warranty.
The benefits conferred by this warranty are in 
addition to all other rights and remedies in respect of 
the product as outlined under the Competition and 
Consumer Act and other State and Territory laws.
“Our goods come with guarantees that cannot 
be excluded in the Australian Consumer Law. 
You are entitled to a replacement or refund for a 
major failure and for compensation for any other 
reasonably foreseeable loss or damage. You are 
also entitled to have the goods repaired or replaced 
if the goods fail to be of acceptable quality and the 
failure does not amount to a major failure.”

Conditions of warranty

Summary of Contents for 11500020













Reviews: