Pullman Holt MAGNETspray, Owner'S Manual

Page: 13 / 16

Unlike conventional sprayers, your sprayer
uses a different method for chemical
application. Therefore, new techniques must
be used to spray and new formulas
developed to properly prepare tank mix. This
section will discuss proper spray techniques
and how to prepare a tank mix.
Note: When using unfamiliar equipment or
chemicals, always test on a small area before
treating the entire crop. Do not use a
chemical with the sprayer if the label
prohibits use in low-volume sprayers.
at full rate, you can start reducing the amount
of chemical used for each spray. Keeping the
amount of water in the tank constant, cut the
amount of chemical mixed in by 15-25% for
each spray until a desirable kill is no longer
achieved. If you are planning to cut rates
then it is very important to scout your crop to
determine spray efficiency.