RoIP-102 User Manual
connection’s optimal environment is private network with static IP route,followed by a dyamic
public IP,such as ADSL,Radio and TV network,under the shared router IP network is relatively
unstable.If you must use the network shared line,strongly recommended the router set to DMZ to
RoIP102 used IP.
Setting up a network first used to confirm the network status,the general recommendation to
use a fixed IP.Choose a fixed IP,WAN port on the network set the bar drop-down menu to select
“Fixed IP”,in accordance with the network administrator to provide the IP,subnet mask,default route
(gateway),DNS server,fill in the correct column in the network settings,Below:
If you are using ADSL dial-up needed line,select the WAN port to PPPoE,the corresponding
usename and password to complete the following chart:
iii. DDNS Settings:
I
f you use dynamic IP dees not depend on the exchange server,the user can use the DDNS
service.is provided free of charge’s dynamic IP address resolution services by SKYLINE
I
f you use dynamic IP does not depend on the exchange with server,the user can use the DDNS
service.DDNS service is a dynamic IP address resolution services is provided free of charge by
SKYLINE.Use of the function,any RoIP device can be used body No as domain name.Through the
DDNS server for the called party’s IP(both sides are using DDNS) setting mode as shown
below.First select the DDNS,and then accordance with existing service providers addresses to fill
out “DDNS server address” hk.ippcn.com,port:39980,update time:600 (second) and the device
serial number(see bottom bar code paper machin SN: ).
After using DDNS,the connected address will be
