RoIP-102 User Manual
V. Default Factory Settings
The table below shows the factory default settings.There are two way to reset to the factory
default settings:
i. Press the RESET switch for more than 15 seconds.
ii. In the Configuration paga,select Tools and then Reset Config.
Item
Factory Default Settings
Range
Login ID
Login Password
admin
admin
Programmable(16
characters in the ASCII
table)
WAN Port Setting
LAN Port Setting
PTT State
DHCP
192.168.8.1
“
0
”
is active
“0” is active low
“1” is active high
PTT maximum duration
Jitter Delay
60 seconds
60 milliseconds
Less than 600 seconds
20-220 milliseconds
