74
CODE
DESCRIPTION
DISPLAY
CODE 83
Activation print to USB
In this code it is possible to enable (CSV) or disable
(OFF) the digital print in CSV format to the USB
pendrive.
After enabling the digital print in CSV format, it is
possible to access the submenu USB PRINT in the
weighing computer.
CODE 84
Multilink
In this code it is possible to activate (ON) or deactivate
(OFF) the devices connected to the scale by means of
MULTILINK connection.
It is possible to set out the use of a single terminal, by
selecting it among the following options:
MV6/AV20-5 (repeater display)
BIG DISPLAY (repeater display)
AV40-5/AV50/AV80 (repeater display and
portable display)
Otherwise it is possible to use more devices connected
at the same time:
By leaving the system the possibility to detect
the
connected
devices
(AUTOMATIC
MULTILINK)
By enabling (ON) or disabling (OFF) manually
(MANUAL MULTILINK) the following devices:
o
TR60: RF-antenna for portable display
AV50/AV60/AV65/AV80
o
DRIVE8: I/O board
o
RF7: RF-antenna for radio control
o
PRINTER (printer)
o
DRIVE 8 #2: Second I/O board
o
DRIVE 8 #3: Third I/O board
o
DRIVE 8 #4: Fourth I/O board
o
SILO
