36
FUNCTION
OPERATION
DISPLAY
BACKUP USB
PARAMETERS
In the submenu
BACKUP USB PARAMETERS
it is
possible to export all parameters and settings of the
weighing computer to a USB pendrive.
Please note that this operation is needed to store all
scale parameters on an external device, in order to be
able to use the parameters again, in case of need.
The backup of the parameters on USB must be
carried out in case of replacement of the scale, so that
the new scale can be configured with the same
parameters and calibrations of the previous one.
Please, remember that the file of the parameters
created by the weighing computer must NOT be
modified in any way.
It is possible to access the menu only when the USB
pendrive is put into the scale. Otherwise, the error
message
ERROR!!!
INSERT USB KEY
will appear
on the display.
BACKUP USB
PARAMETERS
Saving the file
After entering the submenu, enter the name of the file
which is going to be created by means of the numeric
keyboard, and press
to start the backup
operation.
After starting the operation, a waiting screen appears;
after some seconds, the scale rings out a sound, and
a new screen appears, showing the number of
parameters saved in the .CSV file.
The backup operation is now complete.
To leave the submenu, press
.
ATTENTION: in order to prevent mistakes, do not
remove the USB pendrive from its connector during
the download of the backup.
The weighing computer is configured to carry out the
backup parameters automatically every 30 days.
