41
FUNCTION
OPERATION
DISPLAY
RECIPE SELECTION
R
ECIPE
P
ARAMETERS
Recalculation
remainings
When this parameter is active, remainings of material
at the beginning of the loading are considered as
quantity of recipe already loaded.
Therefore, the component quantities to load are
recalculated, so that the weight value at the end of the
loading is equal to the programmed value.
The parameter RECALCULATION REMAININGS can
be set out, only if activated in the menu
RECALCULATION ACTIVATION
.
In order to modify it, place the cell on the flag and
press
.
RECIPE SELECTION
R
ECIPE
P
ARAMETERS
R. First Component
When this parameter is active, the manual passage is
activated during the loading of the component, in
order to measure the loaded quantity; at the end of
the loading the system asks for confirmation, in order
to carry out the recalculation.
By confirming the recalculation of the first component,
the quantities to load of all remaining components are
recalculated according to the variation of the loaded
quantity of the first component.
The
parameter
RECALCULATION
FIRST
COMPONENT can be set out, only if activated in the
menu
RECALCULATION ACTIVATION
.
In order to modify it, place the cell on the flag and
press
.
RECIPE SELECTION
R
ECIPE
P
ARAMETERS
R. Unloading
When this parameter is active, the quantities to unload
are recalculated according to the value measured in
the menu Total Weight.
The parameter RECALCULATION UNLOADING can
be set out, only if activated in the menu
RECALCULATION ACTIVATION
.
In order to modify it, place the cell on the flag and
press
.
