PST MICHELL Instruments MDM300, User Manual, Page: 37 / 70

MDM300 User Manual
Michell Instruments 29
OPERATION
3.4.6 HMI
x5
CONTRAST 80 %
BRIGHTNESS 75 %
KEY TONE ON
BL TIMEOUT 30 Sec
LANGUAGE ENG
PRIMARY DISP INTERN
HMI
CONTRAST 80 %
BRIGHTNESS 75 %
KEY TONE ON
BL TIMEOUT 30 Sec
LANGUAGE ENG
PRIMARY DISP INTERN
HMI
CONTRAST 80 %
BRIGHTNESS 75 %
KEY TONE ON
BL TIMEOUT 30 Sec
LANGUAGE ENG
PRIMARY DISP EXTERN
HMI
CONTRAST 80 %
BRIGHTNESS 75 %
KEY TONE ON
BL TIMEOUT 30 Sec
LANGUAGE ENG
PRIMARY DISP EXTERN
HMI
Figure 23 HMI Page
Parameter Description
CONTRAST
Sets the contrast on the screen.
Available Input: Range:
0 to 100 %
in 5 % increments
BRIGHTNESS
Sets the brightness of the screen.
Available Input: Range:
0 to 100 %
in 5 % increments
KEY TONE
Turns the key tone on or off.
Available Input: ON, OFF
BL TIME-OUT
Backlight control.
Available Input: OFF, 15 to 60 sec in 15 sec increments
LANGUAGE
Sets the language required.
Available Input: ENG, DEU, ESP, FRA, ITA, POR
PRIMARY DISP
Sets the display option.
NOTE: This option is only accessible if an external sensor has
been configured - see below.
Available Input: INTERN, EXTERN
Table 9
HMI Parameters
If no external input is selected the internal sensor temperature is shown, on the
secondary display, by default.
When an external transmitter has been configured, the primary and secondary displays
can be interchanged to show the external sensor reading as the main display and the
internal sensor reading as the secondary display.
With an Easidew transmitter connected, the ability to display the output of the external
device as the main (large character) display can be particularly advantageous for a
number of applications such as:
• Remote monitoring
• Calibration checks on an existing installation
• High pressure measurements