manualshive.com logo in svg

PST MICHELL Instruments MDM300, User Manual, Page: 21 / 70

Share
Download
PST MICHELL Instruments MDM300 User Manual Download Page 21

MDM300 User Manual

Michell Instruments

  

13

INSTALLATION

2.5.1  Gas Inlet /Outlet Fittings

!

HIGH PRESSURE!  High pressure gases are potentially 

hazardous. Energy stored in these gases can be released 

suddenly and with extreme force. High pressure systems 

should be assembled and operated only by people who have 

been trained in proper safety practices.

Before making a measurement, the gas fittings should be attached to the instrument as 

shown in Table 3

.

1.  Fit the required orifice fittings with supplied bonded seals. Ensure bonded 

seals are correctly seated in recessed grooves.

- I.S.

PTFE tape here

1/8” Swagelok 

fitting

Adaptor

Bonded seal

Figure 7 

Bonded Seal Fitting

2.  Fit any other adaptors that might be required.
3.  If the small bore orifice fitting is not being utilized then one of the optional 

application kits could be fitted (as shown below

).

 

 

Figure 8 

Gas Coupling Examples for Atmospheric Pressure Measurement

NOTE:  The application kit shown above (excluding the orifice fittings) is not 

supplied as standard, but is part of a range of kits which can be ordered from 

Michell Instruments, on request.

NOTE: The bonded seals used for the MDM300 are Dowty part number 400-

228-4490-74 (available from Michell instruments, part number MDM300-DS). 

Summary of Contents for MICHELL Instruments MDM300







































































Reviews:

No comments