Collegiate Jam Adjustable Basketball System
17
Install Height Adjusting Decal
1.
Crank Goal to the 10’-0” position. Crank
counter-clockwise to raise goal. Measure from
the playing surface to the top of the goal ring.
Using a piece of tape, mark the location of the
lower edge of the rain shield.
2.
Crank the Goal to the minimum
height so that the Lifting Arm rests
on the stop.
Crank clockwise to lower.
3.
Apply Height Adjusting Decal, #24,
so that the 10’-0” line aligns with
mark from step #1.
4.
Adjust Goal to the desired playing height by cranking up
or down until the desired height mark aligns with the
lower edged of the Rain Sleeve.
Align with 10’
mark on tape.
