Psion Workabout MX, Service Manual

Page: 26 / 36

Confidential - PSION INDUSTRIAL PLC
Workabout MX Service Manual
20 Version 1.0
Final Re-assembly
1
2 Locate the Drawer rails in their tracks.
Slide the Drawer Assembly into the
Chassis Assembly.
3 Connect the Main Power FFC to its ZIF
Connector.
4 If fitted, connect the Expansion FFC to its
ZIF Connectors.
5
Insert the Chassis Assembly into the case.
6
Fit 2 screws in the base of the case.
7 Insert the fuse.
8 Insert the Main and Lithium Batteries.
The Workabout has now been re-assembled.
9
Insert the SSDs.
10 Close the Workabout Drawer.
See Notes Step 5 below
See Notes Step 7 below
Expansion ZIF Connector
Main Power ZIF Connector
Notes on Final Re-assembly
Step 5
Take care to ensure that the Chassis Seal fits correctly.
Step 7
The fuse must be a 1.25 AMP ‘Fast Blow’ glass fuse, 5mm
∅
, 20mm long, Psion part number
A4900-0041.