Psion Workabout MX, Service Manual

Page: 21 / 36

Confidential - PSION INDUSTRIAL PLC
Workabout MX Service Manual
Version 1.0 15
6 If fitted, remove the Decoder or Expansion PCB:
a) On a Scanner Workabout, remove the FFCs from the ZIFs and then remove the 2
retaining screws on the Support Moulding.
b) On a Barcode/Wand Workabout, remove the FFC from the ZIF and then remove the 2
retaining screws.
Retaining screws
Expansion PCB
Monitor PCB
Barcode/Wand Scanner
7 Remove the Option Port FFC, if fitted, and remove the Option Port.
8 Remove the LCD Backlight Power Connector, if fitted.
LCD Backlight
Power Connector
LCD Backlight
Power FFC