Appendix A Programming Guide
Appendix A Programming Guide
A-3
A-4
A-1.3 Semigraphics Support under SAP R/3
A-1.5 Support of Logical and Physical Pages
To increse the printer performance when the printer is running under SAP R/3
Psi provides printer specific SAP R/3 device types. These device types make
use of the special semigraphic line draw elements. (see chapter
A-4 Support of
Semigraphics for SAP/R3
)
The SAP R/3 device type ZPSI2024.PRI including installation description can
be downloaded from the Psi homepage:
www.psi-si.de
A-1.4 EURO Symbol Support
The printer supports printing of the EURO symbol as printer resident character
within the following code tables (see also
Appendix B
):
S
ISO 8859 / 15 LATIN 9
S
PC - 858 Multilingual
S
SYMBOL
S
WINDINGS
Note:
The EURO symbol is not supported in combination with all printer
typefaces.
One Physical page can be spitt into Logical pages by the parameter
LENGTHFACTOR
.
The Pagelength must be configured or programmed according to the physical
length of one page to enshure proper function of the attached stacker. Up to 20
logical pages can be placed on one physical page. The lengthlimit for an
attached stacker (minimum pagelength is 8 inch) is only valid for the physical
pagelength. Two Logical pages of 6 inch can be printed on physical paper with
12 inch length with LENGTHFACTOR = 2.
The following example shows the PJL commands for an application with
imagewidth = 8.5 inch and a logical pagelength of 3 inch to be printed on a
physical pagelength of 12 inch:
ESC%-12345X@PJL SET PAPER = CUSTOM
@PJL SET IMAGEWIDTH = 8.5
@PJL SET PAGELENGTH = 12
@PJL SET LENGTHFACTOR = 4
@PJL ENTER LANGUAGE = PCL
ESC E....PCL file page 1....FF....page 2....FF
....page3....FF ESC E....
Note:
PJL or PCL commands which are related to the physical page like paper
source, number of copies, and cut force a feeding of the paper to the top
of the next physical page.
These settings are valid until a PJL RESET condition. ( PJL SET
command)