Maintenance
Maintenance
5-3
5-4
Close the top cover of the Developer Unit (28). If you hear a "click" the shutter is
closed completely.
Replacing the Waste Toner Container
In case the Waste Toner Container is already filled considerably it is advised to
replace it.
First lift the OPC Drum out of the printer and carefully set it aside on a clean
surface.
Note:
Do not touch the green part of the OPC Drum with your fingers. Oil and
dirt will degrade print quality.
Do not expose the light-sensitive OPC Drum to room lighting or sunlight
any longer than necessary.
Now remove the old Waste Toner Container from its compartment close to the
Developer Unit. Close the filling hole with the green cap. Take care that the cap
fits tightly over the opening.
When shipped two Waste Toner Containers (14) are in the box of the Toner Kit.
Take one of them and put it into the compartment. Please observe that the
green cap is placed on the cap holder and not over the filling hole.