PSC PT Program Generator, User Manual

Page: 72 / 204

Creating & Using Nodes
60
PT Program Generator (PPG) v5.0
Store Info Tab
Data Destination
specifies where to store the input data.
Figure 37. Input Node: Store Info Tab
To specify placement of the data in a register (refer to
Using a Register as a Desti-
nation on page 79
), select
Register
in the
Data Destination
pull-down list. To
store the data in one field of the register, select
Field
from the
Write Type
pull-down list. Specify or define a template, and select the field (refer to
Creat-
ing a Template on page 85
).
To store the data in a file, select
File
from the
Data Destination
pull-down
list, and select a file from the
File
pull-down list. You can choose to insert the
data before a given record in the file, replace a given record, or insert the data
in alphabetic or numeric order (refer to
Files on page 81
).
Output Nodes
Output
nodes send data to the portable’s display, serial port, or system soft-
ware.
2342.book Page 60 Thursday, July 22, 2004 8:35 AM