PPG System Commands
164
PT Program Generator (PPG) v5.0
Using Predefined Defaults
The PSC Falcon PT40 use the following four sets of parameter defaults. Reset
the portable to a predefined default set by scanning one of the bar codes in
Table 3 on page 164
.
Table 3. Predefined Defaults for the PT40
Predefined Defaults
Default Name
Bar Code
Description
Predefined
Default 0
(D0)
Turns every
ON/OFF
param-
eter
OFF
and sets all mini-
mum and maximum lengths
to zero.
Predefined
Default 1
(D1)
Turns every
ON/OFF
param-
eter
ON
, sets all minimum
lengths as low as possible,
and sets all maximum lengths
as high as possible.
Predefined
Default 2
(D2)
Default set installed on the
portable at the factory. This
default set will work for most
applications.
Serial Default
Restores the default serial
communications settings.
* $ + $ - D 0 E E *
* $ + $ - D 1 E E *
* $ + $ - D 2 E E *
* $ + $ - C 8 E E *