Programming the PowerWedge 10
User’s Guide
30
Stop Bits (I.D. #C4)
This parameter selects the minimum space between data characters.
Xon/Xoff Handshaking (I.D. #C5)
This parameter is used for software data-flow control. The host can send
the Xon character (ASCII 11h) to allow transmission and send the Xoff
character (ASCII 13h) to stop transmission.
Protocol (I.D. #CA)
This parameter specifies the format of the data records (groups of data
characters) transmitted and received.
NOTE
Bar codes for setting stop bits are on page 49.
NOTE
Bar codes for setting this parameter are on page 50.
NOTE
Bar codes for setting protocol are on page 50.
