PSC PowerWedge 10, User Manual

Page: 12 / 116

PowerWedge 10 Installation
7
PowerWedge
®
10
3. Attach the small male plug of the cable to the keyboard input jack
on the computer or terminal. Attach the female plug of the cable to
the keyboard cable or port (see
Figure 2
). (For cables with telephone-
style connectors, attach the cable plug to the computer or terminal,
and plug the jack from the keyboard into the socket on the cable
connector.)
4. Plug your bar code scanner into the connector labeled
INPUT
1 on
the PowerWedge 10 (see
Figure 1
).
5. Move the switch on the PowerWedge 10 to the
ON
position.
6. Turn on the computer or terminal. The decoder should beep, and
the green LED (light-emitting diode) should light up.
7. Scan the programming bar code for the type of computer or termi-
nal you are using. (The bar codes for host devices start on page 79.)
You can now begin using the PowerWedge 10.
NOTE
On Macintosh computers, the keyboard connectors are called Apple Desktop
Bus (ADB) ports. They are marked with the following icon: