Programming the PowerWedge 10
29
PowerWedge
®
10
Baud Rate (I.D. #C1)
This parameter determines the communication speed. The setting you use
for the decoder must match the setting that the host uses.
Data Bits (I.D. #C2)
This parameter specifies the number of data bits in each character.
Parity (I.D. #C3)
This parameter specifies the parity of the data characters.
NOTE
Bar codes for setting baud rate are on page 48.
NOTE
Bar codes for setting data bits are on page 49.
NOTE
Bar codes for setting parity are on page 49.
