volt across a cable run is unacceptable. We have equipped the PSC PowerMax
Ultra with Neutrik Speakon connectors for use with your batteries. These
connectors are rated for use up to 30 amps. Each PowerMax Ultra is supplied
with a pair of cables terminated in ring lugs for use with your SLA batteries. We
recommend that you have all your cables professionally built or buy specially
built cables made by PSC from any authorized PSC dealer.
WARNING:
It is highly recommended that you have your cables built by
qualified personnel and tested prior to use with your PowerMax Ultra. All
power cables should be clearly labeled on both ends as to what they are to
be connected to. For example, label one end “PowerMax Ultra” and the
other end “Miranda Mixer”. This will help prevent inadvertently connecting
the cables to the wrong piece of equipment. We cannot stress enough the
importance of good quality power cables and careful connections. Poorly
constructed and/or labeled cables can result in equipment damage!
REAR PANEL CONNECTIONS:
2x Battery Connections
12x Outputs
Remote Fan Cutoff AC Cord
WARNING!
THE PSC POWERMAX ULTRA OUTPUTS MULTIPLE VOLTAGES AT
SUBSTANTIAL CURRENT AND VOLTAGES! ALL AUXILIARY EQUIPMENT
SHOULD BE REVERSE POLARITY PROTECTED AND PROPERLY FUSED TO
MANUFACTURES RECOMMENDATIONS AT ALL TIMES! THE PSC
POWERMAX ULTRA IS CAPABLE OF SUPPLYING MORE THAN 15 AMPS OF
OUTPUT CURRENT INTO A SHORT CIRCUIT BEFORE THE INTERNAL
POLYSWITCH TRIPS. THIS IS MORE THAN ENOUGH POWER TO
SEVERELY DAMAGE UNPROTECTED EQUIPMENT!
DO NOT DISASSEMBLE THE PSC POWERMAX ULTRA! IT CONTAINS NO
USER SERVICEABLE PARTS OR ADJUSTMENTS. HIGH VOLTAGE AND
CURRENT MAY BE PRESENT. REFER ALL SERVICE TO QUALIFIED
PERSONNEL ONLY.